Dynamic bumpers retrofit

Interior and Exterior bodywork Faults and Fixes
Post Reply
RacerRyan
Posts: 1
Joined: Tue Feb 21, 2017 9:17 pm

Dynamic bumpers retrofit

Post by RacerRyan » Tue Feb 21, 2017 9:24 pm

Hello all,

I am new to the forum and was hoping I could find out some information from this knowledgable community.

I am looking into purchasing a 16 plate discovery sport HSE Lux in the coming week or so. I would like to find out if the 17 style dynamic bumpers would be a simple retrofit to the 16 plate car. From images I can't seem to see many differences to fitting and I assume Land Rover wouldn't go into redesigning all the fixtures and fittings just for dynamic bumpers.

Would someone be able to shed some light on this please?

I have searched the forum but unfortunately I couldn't find any information about the retrofit.

Thanks,
Ryan's. 8-)


Mav71
Posts: 319
Joined: Fri Apr 15, 2016 5:58 pm
Has thanked: 3 times
Been thanked: 11 times

Re: Dynamic bumpers retrofit

Post by Mav71 » Thu Feb 23, 2017 8:36 pm

Hi Ryan,

Yes they will be a direct fit, but I believe the rear under tray is different, so may need to change this too.

You'll also have to remove your original exhaust tips, as the Dynamic has a standard pipe with side which sit behind the chrome exhaust trim on the bumper.


Sampit22
Posts: 1
Joined: Fri Feb 01, 2019 7:37 pm

Re: Dynamic bumpers retrofit

Post by Sampit22 » Tue Feb 05, 2019 7:34 pm

Looking in to doing this on mine
any updates on what I need,
and if the undertray does needs changing.
need to see a dynamic exhaust before I get the bumper
can't be that much to it.


Mav71
Posts: 319
Joined: Fri Apr 15, 2016 5:58 pm
Has thanked: 3 times
Been thanked: 11 times

Re: Dynamic bumpers retrofit

Post by Mav71 » Tue Feb 05, 2019 8:14 pm

Front bumper is one off and one on.

Side mouldings are a simply swap, but don’t forget the front small sections that are attached to the front wheel arch.

The rear bumper is also one off and one on, but the whole rear silencer needs replacing because the location of the tailpipes is in a different place to the original tail pipes.


Richy71
Posts: 16
Joined: Thu Jul 18, 2019 8:25 pm
Has thanked: 4 times

Re: Dynamic bumpers retrofit

Post by Richy71 » Sat Aug 31, 2019 3:31 pm

Hi guys.

Bringing an old thread back to life. I did post another thread about doing this and even contacted duckworth as someone mentioned they could help but have had no reply back since i sent it a few days ago

Does anyone have parts numbers for this conversion pls


My reason for doing it is that the rear exhaust tips look a little lame and are uneven so the fake tips and deeper rear end bumper would finish the car nicely. If this worked out I may do the lower dynamic door trim and front bumper
If anyone can help pls

Many thanks Rich
2016 HSE Black corris grey


User avatar
AjM
Posts: 21
Joined: Sun Mar 24, 2019 7:22 pm
Location: South Devon
Has thanked: 2 times
Been thanked: 1 time

Re: Dynamic bumpers retrofit

Post by AjM » Mon Sep 02, 2019 9:50 am

I found this a nightmare as my other posts show. There are lots of little parts that cannot be bought separately, especially for the front. If you are buying everything brand new you will be fine, but if buying used make sure everything is included.
There are issues with the exhausts as mentioned so I decided if I was going to have to change the exhaust, for less money I would get a stainless system and a different rear bumper. The rest was Dynamic. This is what I was left with:

20190830_122536.jpg

20190830_122530.jpg

20190810_173215.jpg

Image Finally! Disco Sport HSE Luxury Black


Dan_Master_J
Posts: 1
Joined: Wed Oct 09, 2019 1:09 pm

Re: Dynamic bumpers retrofit

Post by Dan_Master_J » Wed Oct 09, 2019 3:20 pm

Hi Everyone,

I've recently performed this retrofit/upgrade to my 2015 HSE, i've documented in the youtube video below and also posted a list of part numbers.

Hope everyone finds it useful!





Door Moulding Part Numbers
LR087826 – Dynamic Rear Door Moulding – Right Hand
LR087828 – Dynamic Rear Door Moulding – Left Hand
LR087419 – Dynamic Front Door Moulding – Right Hand
LR087420 – Dynamic Front Door Moulding – Left Hand
LR087821 – Dynamic Wheel Arch Moulding Insert – Left Hand
LR087815 – Dynamic Wheel Arch Moulding Insert – Right Hand
LR073223 – Dynamic Front Wheel Arch with Park Assist (Parking Sensor hole) – Right Hand
LR073224 – Dynamic Front Wheel Arch with Park Assist (Parking Sensor hole) – Left Hand

Rear Bumper
LR073229 – Dynamic Exhaust Finisher\Stainless Surround – Right Hand
LR073230 – Dynamic Exhaust Finisher\Stainless Surround – Left Hand
LR073238 – Towing Hook Cover – Gloss Black
LR073236 - Dynamic Rear Bumper
LR080364 - Dynamic Rear Bumper Valance - Gloss Black

Front Bumper
LR073264/ LR073265 – Dynamic Front Bumper (Maybe part number for whole bumper not just the valance which doesn’t look to be available separately brand new)
LR074944 – Dynamic Front Bumper Valance – Gloss Black


Grille\Vents\Mouldings

LR087791 – Gloss Black Number Plate Surround

LR073217 – Dynamic Front Grille Gloss Black

LR065248 – Dynamic Scuttle panel\front wing vent Gloss Black – Left Hand

LR065249 - Dynamic Scuttle panel\front wing vent Gloss Black – Right Hand


CocoPops
Posts: 49
Joined: Sat Jun 22, 2019 6:53 pm
Location: West Berks
Has thanked: 1 time
Been thanked: 1 time

Re: Dynamic bumpers retrofit

Post by CocoPops » Wed Oct 09, 2019 5:50 pm

Wowzers, not a cheap project?
Even 2nd hand, what did it cost you?

Also, how do you declare to insurance?
On Order: MY20 D240 R-Dynamic HSE Indus Silver.


User avatar
RPR
Posts: 412
Joined: Mon Mar 05, 2018 7:02 pm
Location: Blighty
Has thanked: 13 times
Been thanked: 30 times

Re: Dynamic bumpers retrofit

Post by RPR » Thu Oct 10, 2019 8:36 am

Don't forget to inform your insurance over any changes.
MY18 Indus Silver HSE Black Edition 2.0 TD4 180 ICTP 825w Meridian Audio, Hi Res audio


Post Reply

Return to “Interior and Exterior Cosmetics”