Post your Topix documents here

[MikeJohn]

Excellent Many Thanks!

I have not had to use a garage to something as simple as pad replacement for years, and did not want to start now. I also believe in a strip down, clean and appropriate lubrication of pins/guides etc every couple of years is sensible preventative maintenance.

It actually looks very simple once you know how to keep the Parking brake off!

Mike

[chicken george]

not topix but interesting, sorry if its been posted before - attached

x760 is a jag model

[Chippy]

Thanks cg. I can’t recall that it was posted before but it’s an interesting document which provides a bit more of an insight into the Ingenium engine.

[Badgerface]

Brilliant post CG - I was looking for that exact technical document this week.

I am slightly concerned having studied it that they mention that the i4 uses a Mitsubishi turbocharger, but does not specifically name which one. The one thing that I sincerely do hope is that it's not the TD04V variant, as used on the old SD4 engine - whilst usually ultra-reliable, they have a known Achilles heel when they were used on Freelanders, in that the actuators are solid state, and the electronics are prone to frying, thus causing the actuator arm to seize. Annoyingly, replacing this part is not possible, as its not available and the entire turbocharger will need replacing, at considerable expense (as I well know!)

If anyone on here is able to identify which Mitsi turbo is actually used on the i4 engine, that would be most helpful.

[Rogc]

Does anyone have a copy of 303-01A
This does not come up in the search, and was not part of the original topix uploaded. I was going the review internal engine clearances in relation to the thread ingenium engine service limits.
If this isnt the correct topix note perhaps someone could point me in the right direction.

[Discodaze]

Good afternoon all. HELP please. I have the half height dog guard that I wish to fit. I have the instructions, however in these serials 8 and 13 show an open book icon with 76.13.17 written underneath it. This refers to how to remove and refit the interior boot trim. Can someone tell me what this refers to and provide me with a copy please?

Many thanks.

[HmmmUK]

Good afternoon all. HELP please. I have the half height dog guard that I wish to fit. I have the instructions, however in these serials 8 and 13 show an open book icon with 76.13.17 written underneath it. This refers to how to remove and refit the interior boot trim. Can someone tell me what this refers to and provide me with a copy please?

Many thanks.

Hi - this isn't the answer I'm afraid, but might help others...
The LR doc is here: http://accessories-instructions.landrov ... df/812.pdf
The 76.13.17 ref. is on page 5, but I haven't been able to find any more info I'm afraid...

I see LR have updated TOPIx since I last visited.
The new view doesn't seem to remember VIN searches while the 'simple' view does!?

[discosal]

This is a great idea and thread!
Does anyone still have Topix access and can download and share please the 501-09 - View Mirrors ?
I did not find this section in all the posts here so it will be highly appreciated!

[discosal]

Hi,
See attached all relevant Topix manuals to replace the driver side external mirror - this takes no more than 30 minutes top.

[roydonaldson]

Would anyone with topix access be able to get hold of ICTP update 3_005_10:

https://topix.landrover.jlrext.com/topi ... ?id=896716