Discovery Sport Forum banner

3rd Row Seatbelt replacement

5K views 3 replies 3 participants last post by  Sussexman 
#1 ·
Has anyone replaced a third row seat belt? The webbing has been damaged so it will be an mot failure. The top end looks complicated, can I just pull the trim off worried that there is an airbag warning on the trim. The belt feeds through a letter box opening I take it that the bottom end fitting is small enough to feed through this opening!
Can I just buy an off the shelf seat belt of the correct length, don't fancy Land Rovers silly prices. Would be grateful for any help.
 
#2 ·
I wouldn't fancy taking the belt reel apart to replace the belt, both from a complexity and safety perspective. Abetter option may be to source a replacement reel and belt from a breakers?
 
#3 ·
Unless a dog or small child has chewed through it, I'm surprised the seat belt needs replacing. :shock:

I do seem to recall a post on here where the interior trim had been fitted over the row three seat belts and the fittings were pushed directly through the seat belt webbing at the factory (thus rendering the seat belt completely useless from new). :lol:

And here is the post I mentioned: https://www.discosportforums.co.uk/viewtopic.php?f=11&t=5444

Why don't links work like links anymore on this forum?

Steve
 
#4 ·
My description might have been misleading, I intend to replace the inertia reel completely. My problem is getting access to the inertia reel, not sure how the the trim panels covering the seat belt set up are removed especially the one with the airbag sign on it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top